DEKAphon Pro-Wax - 500 ml

Contents: 0.5 l

• Can be used as cavity sealant, wax underbody protection (not on wooden floors) and as temporary rust protection
• High temperature resistance up to 180°C
• Good corrosion protection
• High penetration capacity
• Low odor
• Does not attack paintwork
• For areas with low stone chipping and abrasion
• Free of aromatics and bitumen
• White-transparent color after drying
• Long shelf life of up to two years

DEKAPHON PRO-WAX is a sprayable corrosion protection coating, suitable for protecting cavities in motorhomes and caravans as well as other applications where surface rust protection is required. The product can also be used as a wax underbody protection (UBS). DEKAPHON PRO-WAX is water-repellent and has excellent penetrating properties as well as self-healing characteristics. After drying, a slightly adhesive wax film with high temperature resistance up to approximately 180°C remains over the treated areas. Therefore, it can also be used, for example, in the engine compartment. It produces less odor than conventional cavity waxes.

Application

• Cavity protection (in chassis, doors)
• Corrosion protection of steel parts (such as seams, sheet metal overlaps, sills, frame parts)
• Protection of spot welds in the engine compartment, strut bolts and water drains
• Temporary rust protection of machine parts, tools, garden and agricultural equipment
• For hard-to-reach areas where corrosion protection is required
• On areas that need protection against corrosion and are not subject to abrasion and stone chips
• Sprayable corrosion protection and cavity sealing
• Cavity protection (in chassis, doors)
• Corrosion protection of steel parts (such as seams, sheet metal overlaps, sills, frame parts)
• Protection of spot welds in the engine compartment, on Strut mountings and water drains
• Temporary rust protection for machine parts, tools, garden and agricultural equipment
• For hard-to-reach areas where corrosion protection is required
• On areas that need protection against corrosion and are not subject to abrasion or stone chips

Application

Shake well before use. The surface to be treated must be clean, dry, and free of rust, dust, and grease. The optimal spraying distance is approximately 30 cm. Spray the surface with DEKAPHON PRO-WAX until a layer of the desired thickness is achieved. If thicker layers are desired, it is recommended to allow the layers to dry between coats. The product can be sprayed without streaking or wetting and does not drip. After use, turn the can upside down and spray briefly to clean the spray nozzle. Soiled surfaces and contaminated equipment can easily be restored to a "fresh" condition with solvent. The recommended application temperature is between 15°C and 25°C.