Gas detector GAS-pro III CO-carbon monoxide

Width: 61 mm
Depth: 35 mm
Weight: 74 g
Height: 97 mm
Voltage: 12 V
Current: 0.009 A
Operating volume: 94 dB

• Detects anesthetic gases, propane and butane, and carbon monoxide
• Integrated siren
• Available in two basic setups

Gas detection according to DIN EN 50194-2 and DIN EN 50291-2 (CO version). Permanent temperature compensation. Regular self-test to verify functionality. Internal 94 dB siren. Auto Sense input and alcohol filter. "Pause" and "ON/OFF" buttons. LED indicator for both sensors. The GAS-pro III is available in two basic setups:

1. With integrated CO (carbon monoxide) sensor

2. With integrated LPG or anesthetic gas sensor

Both versions can be combined with an additional gas or CO sensor. Thanks to technological advancements, the current draw in combination with an LPG/anesthetic gas sensor drops to a minimum of 26 mA, and in combination with a CO gas sensor to just nine milliamperes. The internal siren increases to a piercing 94 dB, and an integrated humidity sensor optimizes measurement in high humidity conditions inside the vehicle or when breathing air is present in close proximity to the sensor. An alcohol filter prevents false alarms caused by alcohol in the air. Thanks to its integrated radio unit, the new GAS-pro III only needs to be connected to the vehicle's electrical system, not to a central control unit. Further specifications: Sensor inputs: 1 internal, 1 external; Sensitivity: 50 ppm (CO), 700/1400 ppm (butane); Temperature range: -20°C to +60°C. gyroscope; picture-in-picture; web-share" allowfullscreen>