Izvēlies kategoriju
Your Cart

ZE-RCE3804 reversing camera for Ford Transit

ZE-RCE3804 reversing camera for Ford Transit
Piegādes veidi

• Izņemt Veikalā (ja preces uz vietas) 0 €
• Omniva pakomāts no 5€
• Piegāde visās ES valstīs no € 7
Klientu atbalsts
+371 22 32 71 19 darba dienās no 10:00 līdz 18:00 (GMT+2)
Zvaniet mums, lai vairāk uzzinātu par šo preci! Bet iepriekš sagatavojiet preces numuru (kas ir noradīta augšā)
Apmaksas veidi
• Bankas pārskaitījums
ZE-RCE3804 reversing camera for Ford Transit
✓ Jauna prece




Pārtulkot produkta aprakstu uz

Apraksts


  • Compact high-resolution plug & play reversing camera
  • Robust red brake light main housing
  • Stainless steel snap-in mounting clips
  • ECE 148R certified brake light
  • Cam sensor with 140° diagonal viewing angle
  • Manually adjustable vertical image section from +20° to -20°
  • IR LED illumination with 6 LEDs and dynamic brightness control
  • Integrated microphone for monitoring ambient noise
  • 3-piece 10 m long system cable with screw-type 4-pin connectors



The ZENEC ZE-RCE3804 reversing camera was designed for vehicles based on the FORD Transit from the 2019 facelift model year onwards and is suitable for all 7th generation Transit models equipped with 3rd The brake light is equipped with swing-out rear doors and does not include an optional plastic brake light housing. The camera module integrated into the LED brake light allows for a simple plug-and-play replacement of the original factory brake light assembly. The camera sensor of the ZE-RCE3804 features a swiveling sensor module for manually adjusting the desired image capture area. The wide 140° diagonal viewing angle for monitoring the area behind the vehicle enables safe reversing and parking. The CCD sensor used offers high resolution, good light sensitivity, and a good signal-to-noise ratio. Six IR LEDs are arranged in a circle around the sensor and controlled by an LDR light sensor, providing automatic twilight and night illumination. The ZE-RCE3804 features an internal microphone for additional audible monitoring of the area behind the vehicle during maneuvering. The 10 m main system cable of the ZE-RCE3804 is equipped with screw-type 4-pin connectors. The ZE-RCE3804 is compatible with reversing camera monitors, 1-DIN and 2-DIN car infotainment systems, moniceivers, and naviceivers that have a (RCA) CVBS camera input with an additional microphone audio (RCA) input. Technical specifications: Image sensor: SHARP RJ2331 CCD sensor (with AA9050) Type: 1/3" / 8.5 mm CCD Sensor TV System: NTSC / 30 fps Viewing Angle: 140° diagonal Native Sensor-SoC Pixel Resolution: 976 (H) x 494 (V) pixels Image-relevant Pixel Resolution: 700 TV lines Lens Focal Length: 2.6 mm Refresh Rate: 30 frames/sec, interlaced Signal-to-Noise Ratio: > 48 dB Dynamic Contrast: > 60 dB Light Sensitivity: 0 Lux with IR LED On Video Output: 1.0 ±0.2 Vp-p, 75 Ω, CVBS White Balance: Auto Exposure Compensation: Automatic
  • Gamma correction: 0.45
  • Brightness adjustment: Automatic
  • Synchronization: Automatic
  • Power supply: 12 V DC
  • Total current consumption (@12 V DC): 80 mA ±10 mA
  • Protection class: IP68
  • Operating temperature: -20° C ~ +70° C

    • Atlikums Rīgas noliktavā: Ir pieejams, 5-9 darba dienas
    • MPN: 82212
    199.00€
    Bez PVN: 164.46€
    Mēs izmantojam sīkfailus, lai personalizētu saturu un reklāmas, nodrošinātu sociālo saziņas līdzekļu funkcijas un analizētu mūsu datplūsmu. Informāciju par to, kā jūs izmantojat mūsu vietni, mēs arī kopīgojam ar saviem sociālās saziņas līdzekļu, reklamēšanas un analīzes partneriem, kuri to var apvienot ar citu informāciju, ko viņiem sniedzat vai ko viņi apkopo, kad lietojat viņu pakalpojumus. Turpinot lietot mūsu tīmekļa vietni, jūs apstiprināt mūsu sīkdatnes.