Izvēlies kategoriju
Your Cart

Universal Trekfinder fender flares - 50 mm

Universal Trekfinder fender flares - 50 mm
Piegādes veidi

• Izņemt Veikalā (ja preces uz vietas) 0 €
• Omniva pakomāts no 5€
• Piegāde visās ES valstīs no € 7
Klientu atbalsts
+371 22 32 71 19 darba dienās no 10:00 līdz 18:00 (GMT+2)
Zvaniet mums, lai vairāk uzzinātu par šo preci! Bet iepriekš sagatavojiet preces numuru (kas ir noradīta augšā)
Apmaksas veidi
• Bankas pārskaitījums
Universal Trekfinder fender flares - 50 mm
✓ Jauna prece




Pārtulkot produkta aprakstu uz

Apraksts

Width: 50 mm
Material: Rubber
Color: Black
Length: 3 m

  • Affordable and flexible fender flares of very good quality
  • Durable fender flares made of black rubber
  • Ideal for e.g. For example, for wheel spacers, wheel spacers, etc. - for required registration or off-road use. The fender flares are glued in the wheel well under the body's flange. The factory-applied backing film is removed, and the flare can be securely glued to the clean surface/fender flange. For challenging off-road use, additional screw fixing of the flare is recommended. The flare is 70 millimeters wide in total - 20 millimeters are used for mounting, and 50 millimeters protrude outwards to cover the tires. Fender flare, black, soft, 50 mm wide, 3 m long, including TÜV certification. The flare is 70 millimeters wide in total - 20 millimeters are used for mounting, and 50 millimeters protrude outwards to cover the tires. Ideal for... For example, when widening the track using wheels, spacers, etc. – for required registration or off-road use. The widening pieces are glued inside the wheel well, under the body's inner lip. Additional fixing with screws is recommended.


    Installation Instructions:

    • The mounting surface must be smooth, rust-free, thoroughly cleaned, and grease-free.
    • The ambient temperature and the temperature of the components or mounting surface at the time of installation and for a period of 24 hours afterward must be at least 20° Celsius.
    • After removing the 3M tape backing film, the extension must be pressed evenly onto the mounting surface with high pressure for approximately 1 minute.
    • Adjust the ends of the extension to your liking with a sharp utility knife to match the vehicle's appearance.
    • Please leave the vehicle standing for at least 24 hours after installation, preferably 48 hours.
    • The adhesive will only reach its final strength after 48 hours.
    • Please do not wash the vehicle for at least 48 hours.
    • In some installation situations, especially if the installation instructions cannot be followed, a Additional fastening using, for example, self-tapping screws, body adhesive, or primer is recommended.
  • Atlikums Rīgas noliktavā: Ir pieejams, 5-9 darba dienas
  • MPN: 912166
58.89€
Bez PVN: 48.67€
Grozā
Uzreiz uz grozu Uzdot jautājumu par šo preci
Vēlmju saraksts Slīdzinājums
Mēs izmantojam sīkfailus, lai personalizētu saturu un reklāmas, nodrošinātu sociālo saziņas līdzekļu funkcijas un analizētu mūsu datplūsmu. Informāciju par to, kā jūs izmantojat mūsu vietni, mēs arī kopīgojam ar saviem sociālās saziņas līdzekļu, reklamēšanas un analīzes partneriem, kuri to var apvienot ar citu informāciju, ko viņiem sniedzat vai ko viņi apkopo, kad lietojat viņu pakalpojumus. Turpinot lietot mūsu tīmekļa vietni, jūs apstiprināt mūsu sīkdatnes.