DEKAsyl MS-6 - White - 310 ml

Contents: 0.31 l

• Excellent adhesion to many substrates (without special pretreatment)
• Free of solvents, isocyanate, silicone, and PVC
• Very good UV and aging resistance
• Neutral, odorless, and fast-curing
• Long working time
• Suitable for sanitary areas (mold-resistant)
• Permanently elastic in a temperature range of -40°C to +90°C
• Compatible with most industrial brushing or coating systems, both with

MS-6 is an MS polymer-based, universal, and elastic sealant and adhesive with excellent adhesion (without special pretreatment) to many materials used in OEM caravans and motorhomes. It is also applicable to aftermarket parts such as painted side panels, plastic parts, and metals. Due to its high elasticity and low hardness, DEKASYL MS-6 is primarily used for sealing applications. However, it can also be used for adhesive applications, provided that high force transmission is not required.

Application

• Elastic seals, e.g., in caravan and motorhome construction.
• Sealing of joints on windows, doors, roofs, and floors.
• Elastic seals in sanitary areas.
• Bonding and sealing of spoilers.

Processing

DEKASYL MS-6 can be easily applied with a hand-held or pneumatic caulking gun at temperatures from +5 °C to 35 °C. For sealing, DEKASYL MS-6 should be further processed or smoothed within 30 minutes (at 20 °C/50% relative humidity) using a spatula or putty knife previously dipped in mild DEKAFINISHER. Avoid allowing DEKAFINISHER to penetrate between the joint surfaces and the sealant, as this will lead to a loss of adhesion. For bonding, the substrates must be joined within 35 minutes (at 20 °C/50% relative humidity) after applying DEKASYL MS-6. The higher the temperature, the shorter the open time! A 2 mm adhesive layer is generally recommended when bonding similar materials (with similar strength). The greater the difference in thermal expansion, the thicker the adhesive layer should be. Further information is available from DEKALIN. At a temperature of 20°C and a relative humidity of 50%, DEKASYL MS-6 can be overcoated with most industrial paints after just 30 minutes. The best possible adhesion of paint layers is generally achieved when the paint is applied 4 hours after applying DEKASYL MS-6. Clean tools or remove any uncured residue of DEKASYL MS-6 with a clean, colorless cloth dampened with DEKACLEAN ULTRA (it is recommended to test beforehand whether the surface is affected by this cleaner).