Elgena Nautic Therm boiler type E 30L

• Hot water for shower, washbasin, sink
• For shore or onboard power
• Free heating via the cooling water
• Long storage of hot water
• Hot water boiler with stainless steel tank
• Electric heating, as well as thermostatic control from 30° - 85°C
• Overheating protection / frost protection
• 1 m cable and Schuko plug

Type E is used specifically for caravans; The Nautic-Therm is equipped with electric heating and thermostatic control, adjustable from approximately 30°C to 85°C, as well as overheat protection and frost protection. The Nautic-Therm is pressure-resistant and can be installed as standard or retrofitted to any cold water supply with hose lines. The water connection is compatible with submersible pumps, foot or hand pumps, and pressure pumps. If connecting to a water line with a pressure higher than 2.5 bar, a pressure reducer must be used. The units are designed for hose connections to counteract vibrations in marine and mobile applications. The Nautic-Therm is designed so that even when the domestic hot water tank is empty, the boiler always remains full and can never be pumped dry. Complete emptying is therefore only possible by opening the drain valve. The Nautic-Therm boiler and heat exchanger are made of the highest quality acid-resistant V4A stainless steel and are fully insulated. Thanks to the excellent insulation, you will still have hot water available the next day. The installation can be carried out, for example, in storage space, under a seating area, or wherever suitable space is available. Detailed assembly instructions are included with every unit.

Technical Data:

• Capacity: 30 L
• Dimensions (L x W x H): 80 x 30 x 30 cm
• Weight: approx. 7.5 kg
• Installation Position: Horizontal - Mounting Strap
• Heating Element: Stainless Steel V4A / Incoloy
• Voltage / Power: 230 V - 660 W (approx. 3 A)
• Heating Time: approx. 120 min (55°C 660 W)
• Connection Cable: 230 V 1 m with Schuko Plug
• Water Temperature: Infinitely adjustable from 30 °C - 80 °C
• Frost Protection: Adjustable from 0 °C - 5 °F
• Water Tank: Stainless Steel V4A
• Insulation: EPS 40 with protective covering
• Overpressure protection: Safety valve up to 3 bar
• Water connection: Ø 10 mm for hose connection
• Boiler drain: Ball valve

All Elgena hot water boilers are exclusively produced and manufactured in Germany.