Material: PlasticColor: WhiteDiameter: Ø 12 mmStraight connector for 12 mm water systemsEasy and quick installation, no cross-sectional narrowing. Quality manufacturing according to ISO 9001 (EN 29001). Can be installed without tools, ideal for DIY installation. No additional sealing material requir..
5.81€
Ex Tax:4.80€
Simple and quick installation, no cross-sectional narrowing. Quality manufacturing according to ISO 9001 (EN 29001). Can be assembled without tools, ideal for DIY installation. No additional sealant required, multiple removals possible...
4.98€
Ex Tax:4.12€
Material: SteelColor: MetalDiameter: Ø 15 mmIdeally suited to Lilie hoses and connectorsRelaxed band clamp for Lilie WhiteYELLOWFlexible spring band clamp for installation with special tools. Constant high closing force, even with temperature fluctuations. Made of spring steel, C75S, corrosion-prote..
0.80€
Ex Tax:0.66€
Made of spring steel, C75S, corrosion-protected, closing force 200-250 Nm. Ideally suited for Lilie drinking water hoses with a 15 mm OD. Tool-free installation thanks to the pre-tensioned clamp. The clamp closes by simply releasing the release mechanism...
1.30€
Ex Tax:1.07€
..
0.80€
Ex Tax:0.66€
..
0.80€
Ex Tax:0.66€
Spring band hose clamp for 10mm hose, pre-tensioned, clamping range 15.7-16.5mm..
5.90€
Ex Tax:4.88€
Diameter: Ø 14 mm Quantity: 5 pieces..
4.90€
Ex Tax:4.05€
Diameter: Ø 15 mm Quantity: 5 pieces..
4.90€
Ex Tax:4.05€
Diameter: Ø 16 mm Quantity: 5 pieces..
4.90€
Ex Tax:4.05€
Diameter: Ø 18 mm Quantity: 5 pieces..
4.90€
Ex Tax:4.05€
Material: Stainless steelColor: MetalInner diameter: Ø 10 mmOuter diameter: Ø 16 mmW1 qualityCertified according to DIN 3017With 7 mm hex boltHose clamp made of galvanized stainless steel in W1 quality with 7 mm hex bolt.Further specifications:Clamping range: 10 - 16 mmWidth: 9 mm..
90.00€
Ex Tax:74.38€
Step drill bit for drilling holes in water tanks..
65.50€
Ex Tax:54.13€
Width: 90 mmColor: Grey/BlackHeight: 30 mmWarning sticker for diesel tank..
0.70€
Ex Tax:0.58€
Color: Grey/BlackDrinking water sign..
0.70€
Ex Tax:0.58€
..
3.90€
Ex Tax:3.22€
..
11.80€
Ex Tax:9.75€
UniQuick pluggable pipe system – quick assembly by simply inserting the pipe into the fittings. Connections can be disassembled and reused if necessary. Precise installation without water pockets minimizes the risk of incomplete drainage during freezing temperatures. Kink-free installation provides ..
4.95€
Ex Tax:4.09€
Drinking water distribution: Optimized water flow thanks to perfectly matched components. Meets all standards. Tested and certified. Quick installation with spring-loaded hose clamp. Perfect with the extra-flexible water hose...
1.30€
Ex Tax:1.07€
Drinking water distribution: Optimized water flow thanks to perfectly matched components. Meets all standards. Tested and certified. Quick installation with spring-loaded hose clamp. Perfect with the extra-flexible water hose (650042+650043)...
2.95€
Ex Tax:2.44€
..
6.70€
Ex Tax:5.54€
..
4.80€
Ex Tax:3.97€
..
4.20€
Ex Tax:3.47€
..
3.90€
Ex Tax:3.22€
Material: PlasticColor: BlueShut-off pressure (bar): 6 barConnection: 12 mmInner diameter: Ø 12 mmConnect, disconnect, reuseExtra durableWith Uniquick, you can easily install your water pipes using the Lego principle – connect, disconnect, reuse. Even when laying around bends and at fittings, full f..
5.19€
Ex Tax:4.29€
..
36.27€
Ex Tax:29.98€
..
52.26€
Ex Tax:43.19€
..
47.81€
Ex Tax:39.51€
Width: 33 mmWeight: 0.2 kgMaterial: plasticColor: GrayHeight: 166 mmLength: 45 mmVoltage: 12 VCurrent: 3.75 AFlow rate: 19 l/minCable length: 1 mCut-off pressure: 1.1 barHigh-performance Reich water pump..
53.90€
Ex Tax:44.55€
John Guest Support Sleeve 12 mm: When using plastic tubing, the use of support sleeves is recommended. Version: Superseal support sleeve with secondary seal. Please note: This support sleeve is only suitable for use with John Guest Speedpex tubing. Additional O-rings provide extra security for the s..
1.87€
Ex Tax:1.55€
12 mm support sleeves: When using plastic pipe, the use of support sleeves is recommended. Design: Simple support sleeve..
1.30€
Ex Tax:1.07€
Compliant with the latest Drinking Water Ordinance (KTW)Flow-optimized water flow, hose outer diameter: 13-17 mm, inner diameter always 10 mm. Water distributor can be flexibly positioned by rotating the connections. Includes nut - no clamp required. With hole for screw for secure mounting...
4.45€
Ex Tax:3.68€
Compliant with the latest Drinking Water Ordinance (KTW)Flow-optimized water flow, hose outer diameter: 13-17 mm, inner diameter always 10 mm. Water distributor can be flexibly positioned by rotating the connections. Includes nut. No clamp required. With hole for screw for secure mounting...
4.50€
Ex Tax:3.72€
Material: PlasticColor: White/YellowDiameter: Ø 10 mmConnection: 10 mm hoseFor 10 mm hosesOptimize the distribution of your drinking water system in motorhomes with our T-connector set for 10 mm hoses. The set contains two T-connectors in a modern white and yellow color combination, perfectly suited..
2.95€
Ex Tax:2.44€
incl. seal45° T-piece for 28 mm pipes, incl. seal...
8.90€
Ex Tax:7.36€
with secure screw connection, for 10 mm hoses, with 1 blanking plug...
6.97€
Ex Tax:5.76€
Width: 185 mmLength: 500 mmPrevents the water tank from freezing in winterSelf-adhesiveThermostatic on/off switchUltraHeat, 12 Volt. Prevents the water tank from freezing in winter. Self-adhesive. Thermostatic switch-on at 4°C, switch-off at 18°C. For tanks up to 110 l, 58 W...
122.00€
Ex Tax:100.83€
Width: 305 mm Length: 500 mm Voltage: 12 V Type: UltraHeat tank heater, 12 volts. Prevents the water tank from freezing in winter. Self-adhesive. Thermostatic switch-on at 4°C, switch-off at 18°C. For tanks up to 200 l, 91 W...
169.00€
Ex Tax:139.67€
..
3.50€
Ex Tax:2.89€
CBE tank probe with 4 rods for tank heights of 40cm. Suitable for connection to systems PC100/PC110/PC180...
23.70€
Ex Tax:19.59€
2 screw anchors for insertion into the tank wall...
4.60€
Ex Tax:3.80€
..
54.50€
Ex Tax:45.04€
..
3.04€
Ex Tax:2.51€
Material: plasticColor: WhiteDiameter: Ø 10 mmFor 10 mm water systemsOn 10 mm hose with 1/2" male thread...
2.10€
Ex Tax:1.74€
Transition connector 1/2" male thread to 10 mm hose...
7.55€
Ex Tax:6.24€
for 10 mm hose, 3/8" male thread..
9.50€
Ex Tax:7.85€
..
6.08€
Ex Tax:5.02€