Виды доставок

• Выбрать из магазина (если товары на месте) 0 €
• Omniva посылки от € 5
• Доставка по всей Европе от € 7
Тех поддержка
+371 22 32 71 19 рабочие дни с 10:00 до 18:00 (GMT+2)
Позвоните нам, для получения дополнительной информации об этом продукте! Предварительно подготовьте номер товара (который указан выше)
Позвоните нам, для получения дополнительной информации об этом продукте! Предварительно подготовьте номер товара (который указан выше)
Виды оплат
• Банковское перечисление
KB 3 boiler 3 l - 230 V / 660 W
249.00€
Без НДС: 205.79€
- Остаток на складе в Риге: 5-9 рабочих дней
- MPN: 67005
✓ Полностью новый продукт
Перевести на
Перевести на
Описание
Width: 160 mm
Weight: 1 kg
Height: 160 mm
Length: 300 mm
Voltage: 230 V
Type: Electric Boiler
Heating Power: 660 W
Rated Current (A) Heating Power: 16 A
Specially designed for installation in mobile vehicles such as caravans and sales vehicles, or anywhere where space is limited or electrical supply with low fuse ratings is required. are.
Weight: 1 kg
Height: 160 mm
Length: 300 mm
Voltage: 230 V
Type: Electric Boiler
Heating Power: 660 W
Rated Current (A) Heating Power: 16 A
- Fast heating with low power consumption
- Standard with stepless thermostat, frost protection and overheat protection
- Water connection 10 mm
- Heating range: 30°C - 85°C
- TÜV-tested
- 5-year warranty
Specially designed for installation in mobile vehicles such as caravans and sales vehicles, or anywhere where space is limited or electrical supply with low fuse ratings is required. are.
KB 3 and the combination versions are low-pressure boilers. They can be connected with a hose to a pressure pump without a check valve or to any other water system with a suitable fitting.
When using a pressure water pump, they must be connected with a low-pressure fitting.
Heatable from approx. 35° to approx. 85°C, mixable to approx. 3 times the amount of water used, low power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat and corrosion resistant. Easy and quick installation with mounting brackets.
Technical data:
- Installation position: Horizontal - wall mounting
- Heating element: Stainless steel V4A / Incoloy
- Voltage / Power: 230 V - 660 W (approx. 3 A): 230 V - 330 W (approx. 1.5 A) / 12 V - 200 W (approx. 16 A) / 24 V - 400 W (approx. 16 A) or combined!
- Heating time: approx. 15 min (55 °C 660 W)
- Connection cable: 230 V 1 m with Schuko plug - 12 V 1 m cable 2 x 2.5 mm 2
- Water temperature: continuously adjustable from 30 °C - 80 °C Adjustable
- Frost protection: adjustable from 0°C to 0°F
- Water tank: PP plastic / suitable for drinking water
- Insulation: PU foam with covering
- Water connections: Ø 10 mm for hose connection
- Boiler drain: manual drain valve